(1) Installation of the SolarSoftware.
Install the SolarSoftware (SSW) with the subpackage 'Radio/NoRP'. We strongly recommend to install the SolarSoftware with the sub-packages for Radio/NoRH and Yohkoh/SXT. If these softwares were not installed, please contact your system manager. The primary distribution site for SolarSoftware is: http://www.lmsal.com/solarsoft/ We define the top directory of SSW as ${SSW} and that of NoRP subpackage as ${NORP} (usually ${SSW}/radio/norp) in this manual.
(2) Installation of NoRP data base
Copy the NoRP data base after getting them
from the NRO solar archive at
ftp://solar-pub.nao.ac.jp/pub/nsro/norh/data.
The recommended destination is ${NORP}/data.
(3) Setup of your personal environment
Include the followings in your environment setup file
(~/.cshrc).
setenv SSW SSW-directory1
setenv SSW_INSTR ``norp''
source ${SSW}/gen/setup/setup.ssw
Note that the enviroment variable ${SSW} can be different
(Ask your system manager)2.
In case you analyze many kinds of
data at the same time, define SSW_INSTR as follows, e.g.
setenv SSW_INSTR ``sxt hxt norh norp''