next up previous contents
Next: Analysis Up: Nobeyama Radio Polarimeters (NoRP) Previous: Introduction   Contents

How to setup


(1) Installation of the SolarSoftware.

Install the SolarSoftware (SSW) with the subpackage 'Radio/NoRP'. We strongly recommend to install the SolarSoftware with the sub-packages for Radio/NoRH and Yohkoh/SXT. If these softwares were not installed, please contact your system manager. The primary distribution site for SolarSoftware is: http://www.lmsal.com/solarsoft/ We define the top directory of SSW as ${SSW} and that of NoRP subpackage as ${NORP} (usually ${SSW} /radio/norp) in this manual.


(2) Installation of NoRP data base

Copy the NoRP data base after getting them from the NRO solar archive at
ftp://solar.nro.nao.ac.jp/pub/norh/data. The recommended destination is ${NORP} /data.


(3) Setup of your personal environment

Include the followings in your environment setup file ( ~/.cshrc).
setenv SSW SSW-directory1
setenv SSW_INSTR ``norp''
source ${SSW}/gen/setup/setup.ssw
Note that the enviroment variable ${SSW} can be different (Ask your system manager)2. In case you analyze many kinds of data at the same time, define SSW_INSTR as follows, e.g.
setenv SSW_INSTR ``sxt hxt norh norp''


next up previous contents
Next: Analysis Up: Nobeyama Radio Polarimeters (NoRP) Previous: Introduction   Contents
NRO Operator
2000-12-21